-
1 × $393.00 -
-
1 × $3,652.00 -
1 × $577.00 -
1 × $1,480.00 -
1 × $997.00 -
2 × $2,614.00 -
1 × $691.00 -
1 × $1,155.00 -
2 × $5,370.00 -
1 × $6,644.00 -
1 × $10,222.00 -
1 × $905.00 -
1 × $1,391.00 -
1 × $2,061.00 -
1 × $3,503.00 -
1 × $1,407.00 -
-
1 × $603.00 -
1 × $4,990.00 -
1 × $603.00 -
1 × $1,936.00 -
-
1 × $1,013.00 -
1 × $3,050.00 -
1 × $3,100.00 -
1 × $8,463.00 -
1 × $1,155.00 -
1 × $367.00 -
1 × $2,193.00 -
1 × $689.00 -
1 × $1,295.00
Compliance West HT-3000S
Roll over image to zoom in
$1,013.00
- High precision leakage current, duration and ground continuity settings.
- Allows no load setup of leakage current and test dwell times.
- Once entered, ground continuity setting, leakage current and test dwell times can be referenced on the front panel display when unit is not testing.
- Leakage currents can be set from 1-20 mA AC or 1-5 mA DC in 0.1mA increments.
- Dwell times can be set from 1-60 seconds in 1 second increments.
- Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
- Small and light. 9.25 wide x 4.75 high x 10 deep. 11 lbs. But rugged enough to test manufactured housing.
- Ground continuity check is defeatable for testing two-wire products.
- Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel. No adapters needed!
- J2 and J3 cords allow connection of pigtail power leads.
- Simple test outcome judgement. Green lights mean pass red lights mean fail. Failing tests sound a buzzer as well.
- Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance.
- Operation Instructions are printed on the rear panel for easy reference.
- In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems.
- RED lights and a buzzer leave no question if a failure has occurred.
- Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™.
- Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1and HTT-1R (With 0.1 ohm Ground check Pass/Fail Setup).
